Fluke's flagship power quality and energy monitor; shipped in hard case with voltage cables, and PC Software. With this time and labor saving feature, you can configure the instrument, receive reports and download data to your computer without ever leaving your office!
This is all you need for a host of power quality and energy studies. It can be configured with your choice of clamp-on CT's or flexible current probes. Call us for advice for the best solution for your application.
Ask about two-week rates, local pickup too. We provide up to 2 hours consulting and training included in rental price.
Download 1770 Series Three-Phase Power Quality Analyzers DataSheet Download 1773/1775/1777 3 Phase Power Quality Analyzer Manual Package
Basic Package |
Pricing |
FLUKE 1777 Three-Phase Power Quality Analyzer Complete with the
|
Rent: Purchase: |
Electrical Characteristics
| Voltage Inputs | |
| Number of Inputs | 4 inputs, 3 phases and neutral referenced to PE (5 connectors) |
| Measurement Category | 1000 V CAT III/600 V CAT IV |
| Maximum Input Voltage | 1000 V rms/1000 V DC (1700 Vpk) |
| Nominal Voltage Range | Wye and single phase: variable (50 to 1000 V) Delta: variable (100 to 1000 V) IEC 61000-4-30 Class A compliance for the nominal voltages (Vdin) 100 to 690 V |
| Input Impedance | 10 MΩ between P-P and P-N, 5 MΩ between P-PE and N-PE |
| Bandwidth | DC to 30 kHz for PQ measurements, excluding transients |
| Resolution | 24-bit synchronous sampling |
| Sampling Frequency | 80 kS/second at 50/60 Hz |
| Scaling | 1:1 variable for use of potential transformers |
| Voltage Transients | |
| Measurement Range | ±8 kV |
| Sampling Rate | 1 MS/second 20 MS/second |
| Bandwidth | DC to 1 MHz |
| Trigger | Adjustable trigger level Triggers on high-frequency components >1.5 kHz |
| Resolution | 14-bit synchronous sampling |
| Current Inputs | |
| Current Inputs | 4 inputs 3 phases and neutral, range selected automatically to attached sensor |
| Bandwidth | DC to 30 kHz |
| Resolution | 24-bit synchronous sampling |
| Sampling Frequency | 80 kS/second at 50/60 Hz |
| Scaling | 1:1 variable |
| Input Voltage | Clamp: 50 mV/500 mV rms; CF 2.8 Rogowski coil: 15 mV/150 mV rms at 50 Hz, 18 mV/180 mV rms at 60 Hz; CF 4 All at nominal probe range |
| Input Impedance | 11 kΩ |
| Data Acquisition Voltage and Current | |
| Input Mains Frequency | DC, 50/60 Hz ±15% (42.5 to 57.5 Hz, 51 to 69 Hz) |
| Topologies | 1- φ, 1-φ IT, split phase, 3- φ delta, 3-φ wye IT, 3-φ aron/blondel (2 element delta), 3- φ delta open leg, 3- φ high leg delta |
| Data Storage | 32 GB microSD card (installed) |
| Memory Size | Typical 10 logging sessions of 8 weeks with 1-minute intervals and 100 events The number of possible logging sessions and logging period depends on user requirements |
| Real-time Accuracy | Internal: 3 ppm (0.26 s per day, 8 s per month) NTP (internet time): depending on internet latency, typical <0.1 s absolute to UTC GPS: <1 ms absolute to UTC |
The Fluke 1777 Power Quality Meter has the great attribute of making power studies simple, safe, and successful. Once power is applied the instrument automatically begins recording. LEDs give you the assurance that the recorder is powered up and signals are within range - no more uncertainty that data is being captured.
Easy to use. No thresholds to program. The 1777 has an exclusive capture algorithm that captures all events without the tedious setups and blind spots associated with threshold-driven equipment. No one wants a wasted power study due to setup mistakes; thanks to Fluke they are a thing of the past!
No-fuss installation. The simple, single-lead voltage connections enable safe and quick installation for single-phase, split single-phase, three-phase wye, three-phase delta configurations. If you need to connect to switchgear, PT and CT ratios can be entered, and two-element and two and a half element configurations are handled too. Check the connections remotely by viewing phasors on a wireless tablet.
Probe smarts, The 1777 automatically detects and scales current clamps and flexible probes. Flexible probes are powered from the meter eliminating the need for probe batteries - so probes won't die when monitoring for long periods
Safety first! The 1777 gives you relief from wearing PPE for long periods. The 1750 can be controlled wirelessly, and easily configured from a tablet; a great idea when encumbered in arc-flash gear. After installation, you can get to a safe distance a few feet away to remove your hood and visor so you can view waveform displays, meter screens, and phasor diagrams in comfort. The built-in wireless technology allows you to control multiple instruments from a distance easily. Alternatively, a laptop can be used instead.
Customize and create Reports. The Fluke software includes an auto-report function to summarize and document the results in graphs and tables. You can create a report on all aspects of power, or by customizing, limit the scope to just those areas of interest.
INCLUDED WITH YOUR RENTAL AND ONLY AVAILABLE FROM POWERetc: Application support (via telephone) and review of your recorded data (e-mailed), maximum of 2-hours/month, minimum increment 15-minutes. (Complete data analysis and report preparation available at additional cost.)
Other Power Quality Analyzers and Energy Monitors Offered with a Built-in Cellular Modem Available Exclusively from POWERetc: